Need Some Help With A Busted Flywheel/ignition.

Hi all,

im new here. My name is Ben and i am living in the Netherlands.
last week i bought a 2004 smr 450 with a blinking, but working head and taillight.

at first i thought it was a faulty earthing wire, but it turned out the stator had gotten loose from the cover. It grinded out the inside of my flywheel that has actual holes inside it now, Stator is pretty much ground flat on the connectors with parts of the body broken off and the thread on the ignition cover is completely gone.



i am going to replace these but the information i can find about the fitting parts is somewhat confusing.

Does anybody know what parts are interchangeable? regarding the ignition cover, flywheel/rotor and stator? its hard to find the original parts.

thanks

Have a look at this site.

https://www.regulatorrectifier.com/... RO20&osCsid=e57dc3299f338f52b44c1671dc8ea1bb

Neem eens contact op met Robin Heeringa van www.smxracing.nl of anders Ben van Erp. Die kunnen je vast vertellen wat nog te krijgen is of welke alternatieven er zijn...

Thanks all, i somehow ended up with 3 complete sets of diffrent code stators/flywheels.

They all seem to have the exact same sizes (450 flywheel, dont know about the smaller 250's) for fitment just be carefull to have the 2 bolt stators for the cover and the flywheel for carbed versions.

On this page https://shop.italhusky.com/en/products/2004/te-tc-smr-250-400-450
you can compare and buy original parts.