My '09 TE 510

Just got my '09 TE 510! What a bike! Here are a couple of pics ...

Anybody know if the power up kit comes with the bike? Here is what I received from the dealer (photo)

BTW... Happy 4th of July !!!


http://www.cafehusky.com/forums/att...&d=1246735076chmentid=1402&stc=1&d=1246735076

Congratulations. Aren't they so sweet when they are new?

You have the PU kit. Pull the pipe mid section and remove the cat inside, remove the O2 sensor, plug the hole, install the plug in module where the sensor was plugged in, swap the filter cages and tail lights.

BTW- I don't see the brass plug in the picture. If you didn't get it tell the dealer you need it.

Congrats enjoy!

Thanks for the info. I will talk to the dealer about that brass plug. The bike seems to be restricted somewhat (only 30 miles on it). Wondering if there is an issue with the fuel injection? Also, it seems to be geared quite low for a six speed ... any suggestions?

Look at that beast! Yep, going to need a plug for the hole in the header where the o2 sensor resides when you remove it. Shot in the dark as to how she'll run after you install power-up stuff. May run better or great, may not. Hope you have a good running one. Need to get some mud on that Wolf!

They are geared low for the street, but a 14 tooth counter shaft sprocket makes it very street-able.

The PU kit swap will make it run a lot better, along with some generous break in time.

WOW!! Too CLEAN!! Congrats!
Why the replacement tail light/fender? They do look better.. anything else?

Nice catch! do the filter cage mod now. Do the rest of the PUK later. Sweet machine...

Thanks for the advice. This site is great and extremely helpful