1. Husqvarna Motorcycles Made In Sweden - About 1988 and older

Mini 6 puller

Discussion in 'Vintage/Left Kickers' started by ct cr430, Aug 12, 2019.

  1. ct cr430 Husqvarna
    AA Class

    Location:
    Connecticut , litchfield county
    Husqvarna Motorcycle:
    1981 cr 430
    Other Motorcycles:
    2007 honda crf450
    Does anyone know the correct size puller for a motoplat mini 6 flywheel ?
    ct cr430, Aug 12, 2019
    #1

  2. motomwo Husqvarna
    AA Class

    Location:
    Imbler Oregon
    Husqvarna Motorcycle:
    Many vintage big bore and automatics
    26mm x 1.5

    Hope this helps!
    Marty
    motomwo, Aug 12, 2019
    #2
    justintendo likes this.

  3. ct cr430 Husqvarna
    AA Class

    Location:
    Connecticut , litchfield county
    Husqvarna Motorcycle:
    1981 cr 430
    Other Motorcycles:
    2007 honda crf450
    Yes it does , thanks Marty . It looks smaller but then again I haven’t even taken the nut off yet . Left hand thread ?
    ct cr430, Aug 12, 2019
    #3

  4. Bryll Husqvarna
    AA Class

    Husqvarna Motorcycle:
    Some
    Other Motorcycles:
    Some
    Left hand thread, YES
    Bryll, Aug 12, 2019
    #4
    justintendo likes this.

  5. motomwo Husqvarna
    AA Class

    Location:
    Imbler Oregon
    Husqvarna Motorcycle:
    Many vintage big bore and automatics
    Yes the shaft nut is left hand threads. The flywheel puller tool has right hand threads.

    Marty
    motomwo, Aug 12, 2019
    #5
    markt2 likes this.

  6. ct cr430 Husqvarna
    AA Class

    Location:
    Connecticut , litchfield county
    Husqvarna Motorcycle:
    1981 cr 430
    Other Motorcycles:
    2007 honda crf450
    Thanks Marty
    ct cr430, Aug 13, 2019
    #6