idling & THROTTLE problem te 2008 450

HI GUYS
MY BIKE HAS AROWW EXHAUST AND THERE IS RESISTANCE IN SENSOR EXHAUST.
ACCIDENTALLY remove IT and put BACK IN WRONG POSITION IN CONNECTOR.
WHEN BIKE STARTED NEUTRAL LAMP DO A ALARM....
I searched and found 630 BIKE IN CONNECTION RESISTANCE MUST BE GREEN-RED & WHITE-BROWN.
IS THE SAME IN MY BIKE; (TE 450 2008)
I put THESE PLACES BUT MY BIKE WORKS NOT RIGHT
PLEASE HELP
MUST CONNECTED TO PC;

Thanks for answer
I will checking but before want to know if the resistance connection is right about the position in connector

Check all connector all relays is ok +i cleaning all with contact cleaner.
When put out the resistance neutral light do alarm again
When put it back the problem coming...
Low idling 1350-1550 up down up down
I thing must go to dealer pc connect.....
Some other idea???

If you have an alarm then I-beat should tell you what it is.

Without the resistor it is probably sensing no O2 sensor.

The resistor I have on both my bikes is a Husky factory plug that goes in the O2 socket.
That looks like just a resistor someone put in there, and it may not be making contact.

I'd look for the proper factory resistor.

all right
I was DEALER WORKSHOP
put THE RIGHT CONNECTOR,
CLEARING ECU MEMORY FROM SOFTWARE .
NOW MY HUSQY IS AGAIN A rocket
THANKS!!!

There you go!