1. Husqvarna Motorcycles Made In Sweden - About 1988 and older

ID this pipe

Discussion in 'Vintage/Left Kickers' started by Picklito, Apr 27, 2024.

  1. Picklito Husqvarna
    Pro Class

    Location:
    Washington
    Husqvarna Motorcycle:
    430, 430, 430, ,400, 175
    Other Motorcycles:
    KTM250xc, KTM500mx, KTM440exc
    Got this pipe in a parts lot of mostly 1982 250xc stuff. No labels or numbers on it, but it's not the typical Husky stampings or tabs. And fatter in the mid-section. Tabs are in the basic 1982 locations. Asch? Displacement?

    Attached Files:

  2. motomwo Husqvarna
    AA Class

    Location:
    Imbler Oregon
    Husqvarna Motorcycle:
    Many vintage big bore and automatics
    I believe that is I either a Pro Circuit or Asch pipe. I had an Ashe pipe on 79 250CR many many years ago and it looked just like that.
  3. Picklito Husqvarna
    Pro Class

    Location:
    Washington
    Husqvarna Motorcycle:
    430, 430, 430, ,400, 175
    Other Motorcycles:
    KTM250xc, KTM500mx, KTM440exc
    Thanks. I got some 430 stuff in the pile as well. I wonder if it's 250 or 430.
  4. motomwo Husqvarna
    AA Class

    Location:
    Imbler Oregon
    Husqvarna Motorcycle:
    Many vintage big bore and automatics
    Looks like the 430 pipe to me. The 250 pipe stinger is smaller in diameter and at the very aft end had a collar that sized the stinger back up to fit the oem silencer. Also the rear mount bracket on the 250 pipe is welded onto the stinger due to the 250 stinger was longer than the 430 pipe's stinger.
  5. Picklito Husqvarna
    Pro Class

    Location:
    Washington
    Husqvarna Motorcycle:
    430, 430, 430, ,400, 175
    Other Motorcycles:
    KTM250xc, KTM500mx, KTM440exc
    I forgot about the stinger size. It's definitely a 430 pipe. Thanks.