Hey guys, I'm currently checking over my engine. While removing my clutch discs, I discovered that the actuator rack of the clutch mechanism has lot's of play in the bearing. I measured the bearing, it's 15 mm inside (like it's supposed to be). The shaft itself is only 14 mm, but doesn't show any signs of wear. Is this correct like it is? With 1 mm of play, it moves around a lot. Yes, it will be centered by the clutch cover hole, but I just wanted to verify that this is normal. See the pictures for a better understanding. Thanks a lot, Flo
That's perfectly normal, i just checked on a spare clutch. The bearing only receives axial load. Voll normaaal ey....
