Fuses Out Or More Issues Need Help

Bought a 2013 TE310. Previous owner had cut wires to tail lights. I am attempting to reconnect (not much of an electrician) but I also have no power to computer, headlight or horn. I can only find 3 fuses in the battery box area and they all are ok. Is there any fuses elsewhere that could be the culprit for the headlight and front area electronics?

Your "DC" relay should come on about 2 seconds after your keyless bike is started (and should stay on about 7 seconds after the engine stops). The fan and it's fuse is on this circuit too IIRC- so if the fan has been working, the relay is fine. This relay controls everything (lights, horn, sigs) except your engine stuff ("power" relay: ECU, FI, TPS, coil, O2 sensor, MAPS, more).

ensure you have 12v coming out of it or going into your fuses.

The wire conduit coming out of the relay may have "DC" imprinted on it. Right side number plate.

Check the blade fuse in the starter relay. It's on the left side of the subframe next to the battery. If you trace the thick positive wire from the battery it goes straight to it. One of the fuses is used, the other is a spare.

The fuse is not used for the starter. It is the main fuse to the wiring loom power supply circuits.

Thanks, I will check tomorrow.

How did you go?