1. 4 Stroke Husqvarna Motorcycles Made In Austria - About 2014 & Newer
     FE = 4st Enduro & FC = 4st Cross

FE/FC exhaust question for a 2015 fe 501

Discussion in '4st' started by terry46, Jan 8, 2017.

  1. terry46 Husqvarna
    B Class

    Husqvarna Motorcycle:
    2015 fe 501s
    Other Motorcycles:
    harley softail deuce
    FMF Racing 045460 Factory 4.1 RCT Full System
    this is for a 2015 ktm 450xcw i found a great deal on it and was curious if it would fit my 2015 fe 501.the header looks like it might work but it appears the muffler only has one mounting tab.any help would be greatly appreciated

    Attached Files:

    terry46, Jan 8, 2017
    #1

  2. Teambowles Husqvarna
    Pro Class

    Location:
    NorCal
    Husqvarna Motorcycle:
    19 FE501
    Other Motorcycles:
    19 ktm 6 days excf 450 n excf 500
    Can't go by pics, usually not the correct pic for bike just a generic one. I highly doubt a 450 exhaust part will fit a 501 but just my opinion. Go to fmf website and check part numbers...
    Teambowles, Jan 8, 2017
    #2

  3. octagon pilot Husqvarna
    AA Class

    Location:
    Desert Southwest
    Husqvarna Motorcycle:
    2015 FE501s 2009 TE610
    Other Motorcycles:
    YZ450FX Tenere 700
    Ktm has different subframe and shock location- no go.
    octagon pilot, Jan 9, 2017
    #3

  4. terry46 Husqvarna
    B Class

    Husqvarna Motorcycle:
    2015 fe 501s
    Other Motorcycles:
    harley softail deuce
    ok,i have an update.i bought the exhaust system.couldnt resist at the price.229.00 for the titanium system
    and it works great,i did have to make the factory bend in the header to clear the shock a little longer but it wasnt much and wasnt hard to do either,other than taking it off and on to test fit.
    terry46, Jan 16, 2017
    #4
    87husky500xc likes this.

  5. 87husky500xc Husqvarna
    Pro Class

    Location:
    Dayton NV
    Husqvarna Motorcycle:
    2020 tx300i and a few vintage bikes
    Other Motorcycles:
    77 honda xr-75..
    How's it run?
    87husky500xc, Jan 16, 2017
    #5

  6. terry46 Husqvarna
    B Class

    Husqvarna Motorcycle:
    2015 fe 501s
    Other Motorcycles:
    harley softail deuce
    it rips!
    terry46, Jan 17, 2017
    #6

  7. 87husky500xc Husqvarna
    Pro Class

    Location:
    Dayton NV
    Husqvarna Motorcycle:
    2020 tx300i and a few vintage bikes
    Other Motorcycles:
    77 honda xr-75..
    Glad it all worked out for ya. Quite a bit louder? Where are the gains most noticeable?
    87husky500xc, Jan 17, 2017
    #7

  8. endurists Husqvarna
    A Class

    Husqvarna Motorcycle:
    FE501
    Other Motorcycles:
    Husaberg FE501 2013, KTM Adv LC4


    450SX fits straight to 501, here is mine setup
    [IMG]
    endurists, Jan 17, 2017
    #8

  9. terry46 Husqvarna
    B Class

    Husqvarna Motorcycle:
    2015 fe 501s
    Other Motorcycles:
    harley softail deuce
    it is a little louder. i have the quiet insert in it also.deeper sounding to.but its not obnoxious at all
    i think the difference is across thge board .it already had tons of power but made a noticable difference,pulls 3rd gear wheelies like it did before in second.
    id still like to see what my tps is set on.dont know if ill mess with it though
    oh and it has the euro map i believe its called
    terry46, Jan 17, 2017
    #9