1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
    WR = 2st Enduro & CR = 2st Cross

250-500cc Cylinder Nut Size

Discussion in '2 Stroke' started by Darren Byington, Apr 22, 2024.

  1. Darren Byington Husqvarna

    Husqvarna Motorcycle:
    2022 FX 450,2009 WR300
    What size are the cylinder nuts? 13mm is too small, 14mm is a hair too big (and rounds off the nuts). Standard sizes do not fit either. Head shape is too funky to get a socket on them.
  2. Darren Byington Husqvarna

    Husqvarna Motorcycle:
    2022 FX 450,2009 WR300
    Sorry, 2009 WR300.
  3. Dirtdame Administrator

    Location:
    Rock Springs Wy
    Husqvarna Motorcycle:
    11 WR300,13 WR125,18 FE501
    Other Motorcycles:
    17 Beta Xtrainer
    I haven't looked at my 2011 recently, but the last time that I rebuilt the top end, I didn't have any problems with the cylinder base nuts. Standard metric. Should be the same hardware on your bike. I'll go over to storage and double check the size when I get a chance.
    Darren Byington likes this.
  4. Dirtdame Administrator

    Location:
    Rock Springs Wy
    Husqvarna Motorcycle:
    11 WR300,13 WR125,18 FE501
    Other Motorcycles:
    17 Beta Xtrainer
    I went over to the storage unit today and checked out the hardware size. The cylinder base nuts are 14mm. They do seem to be alittle easy to slip off of, so choose your wrench wisely and make sure to keep constant downward pressure on it.
    2premo likes this.
  5. 2premo Husqvarna
    Pro Class

    Location:
    Northern NV
    Husqvarna Motorcycle:
    98 WR360, 1987 WR430, 1988 XC430
    Other Motorcycles:
    Sherco 300, 2002 KTM 380EXC
    using a quality wrench makes a difference, I use Mac and Snap-On
    Vinskord and Dirtdame like this.
  6. Picklito Husqvarna
    Pro Class

    Location:
    Washington
    Husqvarna Motorcycle:
    430, 430, 430, ,400, 175
    Other Motorcycles:
    KTM250xc, KTM500mx, KTM440exc
    Once you get them removed, It might be time to go with new ones, and get yourself a 6-point box wrench for just that location.
    Dirtdame likes this.
  7. Darren Byington Husqvarna

    Husqvarna Motorcycle:
    2022 FX 450,2009 WR300
    Thanks for the input everyone. I wound up cutting them off
  8. flyingbob Administrator

    Location:
    USA
    Husqvarna Motorcycle:
    01&02WR360_02WR250_02CR250_12WB165
    Other Motorcycles:
    01 VOR400_07 TM450_22 GG250_07 Tuono
    Have you had the bike for a while?
  9. Darren Byington Husqvarna

    Husqvarna Motorcycle:
    2022 FX 450,2009 WR300
    No sir. I picked it up as a project bike