125-200cc Cr/WR 125 longer Kickstarter option

If anyone is looking for a longer Kickstarter or want to repair a flogged one for a Cr/Wr 125 [mine is an 07 Wr125] buy a RHK -KST506-0 [Australian Brand] to suit a 16 on KTM 125 then disassemble it.
You will find the husky knuckle [the part that has the spline] is near identical to the RHK one the difference being the spline and the position of the detent hole plus the shaft diameter on my husky knuckle measured 8 thou smaller than the RHK one but that was more that fact that is 15 years of wear but was still a good fit.
So use the new RHK lever with the old husky knuckle and drill the half hole in the old knuckle for the new lever the detent ball and spring its on the opposite side on the RHK lever.

Hope that all makes sense.

Same as 16 plus ktm 125 kick starter

COUPLE OF INCHS LONGER