Carb jetting and parts

Checkout. http://www.jetsrus.com/

They have lots of parts.

Just placed an order. Much easier than Sudco. I used to use carb parts warehouse but they're not coming up. I was unable to source the needle jet. Mikuni numbers do not correspond to the numbers listed in the Husky specs. Doubt I'll need it anyways

Which tranny did you buy for cr or wr? The needle jet goes with the needle. It's on that chart on my other post. I'm going to set up my cr carbs. Not sure if what I have is stock or not. I'll check them first.

Don't forget a new needle and seat for the float.

Thanks Bill. float and seat are fine. I have the CR tranny, plan to keep that and gear down as necessary.