1. Husqvarna Motorcycles Made In Sweden - About 1988 and older

Boyesen Reeds Quantity

Discussion in 'Vintage/Left Kickers' started by Dwarf66, Dec 29, 2016.

  1. Dwarf66 Husqvarna
    AA Class

    Location:
    CT
    Husqvarna Motorcycle:
    79 250OR 84 250WR 87 510 TE
    Other Motorcycles:
    78.5 RM250C-2 82 PE175Z
    I need to put new reed valves in my 79 250OR. When looking at the packaging it looks like I need to order two sets at $59 each, or are all 4 supplied for that price? Has anyone had to do this lately? I cannot believe it is over $100 for reeds for this bike.
    Thanks
    Marc
    Dwarf66, Dec 29, 2016
    #1

  2. oldbikedude Husqvarna
    Pro Class

    Location:
    Honey Brook Pa.
    Husqvarna Motorcycle:
    1988 wr 430 with cr suspension
    Other Motorcycles:
    66flh,67 CA77,76 CR125M,73H1,74ty250
    Should be one pack per bike.
    oldbikedude, Dec 29, 2016
    #2

  3. hva-factory CH Sponsor

    Location:
    uk
    Husqvarna Motorcycle:
    Husqvarna 510TE , 300WR Etc...
    Yes, the reeds are sat on top of each other in the packet - making it look like you need to order two lots, but don't be fooled they are all in there!!!

    Andy
    hva-factory, Dec 30, 2016
    #3
    2premo and Dwarf66 like this.

  4. Dwarf66 Husqvarna
    AA Class

    Location:
    CT
    Husqvarna Motorcycle:
    79 250OR 84 250WR 87 510 TE
    Other Motorcycles:
    78.5 RM250C-2 82 PE175Z
    Thanks for that Andy
    Dwarf66, Dec 30, 2016
    #4

  5. disonny Husqvarna
    AA Class

    Location:
    upstate ny
    Husqvarna Motorcycle:
    73 360 wr/rt, 75 wr250 78 cr250,
    Other Motorcycles:
    83 wr250, 84 wr400
    once you change them make sure to get a good ride on the bike. I put them in my 83 and it needs re jetting. The directions say they may make it run rich.
    disonny, Jan 1, 2017
    #5
    Dwarf66 likes this.