1. Husqvarna Motorcycles Made In Sweden - About 1988 and older

Balls!

Discussion in 'Vintage/Left Kickers' started by stormer254, Feb 8, 2015.

  1. stormer254 Husqvarna
    AA Class

    Location:
    England
    Husqvarna Motorcycle:
    More than I dare let her know
    Other Motorcycles:
    Yes!
    Trying to reassemble a 73 chassis, does anyone know the size of the ball bearings for the head stock, I have the races and cages?
    stormer254, Feb 8, 2015
    #1

  2. 86 400 XC Husqvarna
    Pro Class

    Location:
    Calgary
    Husqvarna Motorcycle:
    75,82,83,2x84,85,3x86,87,88 and 89
    Other Motorcycles:
    more Huskys
    86 400 XC, Feb 9, 2015
    #2

  3. jimspac Husqvarna
    Pro Class

    Location:
    Connecticut
    Husqvarna Motorcycle:
    82 250WR, 82 430WR, 84 250WR, 85 400
    Other Motorcycles:
    86 400WR, 82 Montesa Cota 349
    3 or 4mm
    jimspac, Feb 9, 2015
    #3

  4. Drew Smith Husqvarna
    AA Class

    Location:
    Hope N.J. U.S.A.
    I have an NOS replacement set and the balls measure 4.75 mm the balls are not loose but in a cage, I suppose loose will work just as well.
    Drew Smith, Feb 9, 2015
    #4

  5. 86 400 XC Husqvarna
    Pro Class

    Location:
    Calgary
    Husqvarna Motorcycle:
    75,82,83,2x84,85,3x86,87,88 and 89
    Other Motorcycles:
    more Huskys
    Yes loose is the better way, pack as many in as you can.
    86 400 XC, Feb 9, 2015
    #5

  6. stormer254 Husqvarna
    AA Class

    Location:
    England
    Husqvarna Motorcycle:
    More than I dare let her know
    Other Motorcycles:
    Yes!
    That makes them 3/16"? Seems strange size for an European bike!
    stormer254, Feb 10, 2015
    #6