1. 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     TE = 4st Enduro & TC = 4st Cross

Adjusting Timing Chain Tensioner Te310 I.e 2011

Discussion in '4 Stroke' started by Alpar, Oct 30, 2020.

  1. Alpar Husqvarna

    Husqvarna Motorcycle:
    TE310
    Hi guys!
    My TE310 2011 Husqvarna started to make a weird klicking noise. After some research I think that it might be caused by the timing chain tensioner.
    How can i adjust it? What else should I know?

    Thank you
    Alpar, Oct 30, 2020
    #1

  2. Darkside Husqvarna
    AA Class

    Location:
    SF Bay Area
    Husqvarna Motorcycle:
    none left
    Other Motorcycles:
    beta, ktm, aprilia
    they have an automatic ratcheting style tensioner. after a while the ratchet pawls start to slip. I replaced mine with a manual type
    Darkside, Oct 30, 2020
    #2

  3. Alpar Husqvarna

    Husqvarna Motorcycle:
    TE310

    Do I have to disassemble the engine, or I can just undo the 2 bolts holding the tensioner in place and change it that way? Thank you for your help
    Alpar, Oct 31, 2020
    #3

  4. Darkside Husqvarna
    AA Class

    Location:
    SF Bay Area
    Husqvarna Motorcycle:
    none left
    Other Motorcycles:
    beta, ktm, aprilia
    it's just bolt on. I found an extra adjuster gasket. you can have it if you want it. pm me your address and I'll drop it in the mail

    Attached Files:

    Darkside, Oct 31, 2020
    #4
    Dave86 likes this.

  5. BurpOOHHH Husqvarna

    Location:
    Near Washington D.C.
    Husqvarna Motorcycle:
    2011 TXC 250
    Other Motorcycles:
    2008 SV650, 2006 V-Strom 1000
    I have the 2011 TXC 250 with the same issue. What manual tensioner did you purchase to fit?
    BurpOOHHH, Jan 9, 2023
    #5

  6. joedirt Husqvarna
    AA Class

    Location:
    PA
    Husqvarna Motorcycle:
    wr250
    If the timing chain is noisy. Replace it. I had a timing chain break. Not good. Valves are expensive.
    joedirt, Jan 30, 2023
    #6
    Dave86 and BurpOOHHH like this.