1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

250-500cc '99 Husky CR250 Plastics

Discussion in '2 Stroke' started by guscycle, Jul 15, 2018.

  1. guscycle Husqvarna
    AA Class

    Location:
    Florida
    Husqvarna Motorcycle:
    '99 Husky CR250, '07 Husky WR125,
    Other Motorcycles:
    '10 Husky SMR450, '98 Husky Scooter
    Any insight where I can dig up some plastics for my new project bike. So far DC only(crispy plastics). I know Suzuki(early 2 stroke0 front fender color and fit are close.
    THANX
    guscycle, Jul 15, 2018
    #1

  2. 2premo Husqvarna
    Pro Class

    Location:
    Northern NV
    Husqvarna Motorcycle:
    98 WR360, 1987 WR430, 1988 XC430
    Other Motorcycles:
    Sherco 300, 2002 KTM 380EXC
    pm sent
    2premo, Jul 15, 2018
    #2

  3. Skyldig Husqvarna
    AA Class

    Location:
    Sweden
    Husqvarna Motorcycle:
    1999 WR360
    Other Motorcycles:
    CRF100, CR250, KX60, ZXR
    Is DC plastic crispy? Like brittle? I'm looking for 1999 side panels and so far no luck. I've considered DC plastic for a while but I've got no reference regarding the quality.

    I did however find a yellow new rear fender though. Perhaps it can be some help even if your request was back in 2018:
    https://www.enduroklassiker.at/en/husqvarna-parts/5206-kotflgel-vorne.html
    Service and communication was super fast. Quality was not 100% but OK. It was not original Husqvarna but CEmoto #2643 Made in Italy https://www.cemoto.it/index.php/pro...ngo-posteriore/parafango-posteriore-7398.html
    Skyldig, Oct 15, 2020
    #3
    steadydirt likes this.

  4. guscycle Husqvarna
    AA Class

    Location:
    Florida
    Husqvarna Motorcycle:
    '99 Husky CR250, '07 Husky WR125,
    Other Motorcycles:
    '10 Husky SMR450, '98 Husky Scooter
    Good to know on the rear fender...I had bought one from someone in Italy(rear fender)...seems ok plastic but no holes were drilled for mounting..no biggie. I still haven't bought my rear number plates or tank shrouds from DC- I was told they were not as pliable as oem or any of the other suppliers like UFO or Acerbis and the the rear number plates don't utilize the nipple to rubber grommet anchoring..it needs to attached by a bolt/ nut or bolt with insert in frame.
    guscycle, Nov 1, 2020
    #4