1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
    WR = 2st Enduro & CR = 2st Cross

250-500cc 98 360 Service

Discussion in '2 Stroke' started by 2premo, Apr 3, 2021.

  1. 2premo Husqvarna
    Pro Class

    Location:
    Northern NV
    Husqvarna Motorcycle:
    98 WR360, 1987 WR430, 1988 XC430
    Other Motorcycles:
    Sherco 300, 2002 KTM 380EXC
    well it's spring here and the snow is melted far enough to ride
    so I took my 98 out to service it, lube and change fuel
    it just would not start, so finally pulled the tank for plug access, it was full and spit out the plug hole
    pulled the carb, for some odd reason the needle was not any good, go figure it only lasted 23 yeats
    checked the warranty status, but no avail, lol
    found a needle locally, it now runs fine
    so changed the cleats in a pair of Fastway pegs an put them back on after all these years
    ready for a morning ride :banana:


    55B834DB-8E6C-42A7-9C6E-5514C242FD97.jpeg BA07A538-FF50-4B4F-B75A-22C0F5049380.jpeg A64DEB53-7733-4899-863D-F1A401BA774B.jpeg DA78AE71-0047-494B-BA4E-1F470F9F61BC.jpeg
    Chisler likes this.
  2. 2premo Husqvarna
    Pro Class

    Location:
    Northern NV
    Husqvarna Motorcycle:
    98 WR360, 1987 WR430, 1988 XC430
    Other Motorcycles:
    Sherco 300, 2002 KTM 380EXC
    only 4 photos to a post, here's the pegs

    F82FAD6C-C18D-48A5-944F-8461592E270D.jpeg
    Chisler and NvRider55 like this.