1. Husqvarna Motorcycles Made In Sweden - About 1988 and older

83 tank on 84 WR with 84 seat

Discussion in 'Vintage/Left Kickers' started by Dwarf66, Jan 13, 2019.

  1. Dwarf66 Husqvarna
    AA Class

    Location:
    CT
    Husqvarna Motorcycle:
    79 250OR 84 250WR 87 510 TE
    Other Motorcycles:
    78.5 RM250C-2 82 PE175Z
    Do I have to run the 83 seat to fit the 83 alloy tank on an 84 250WR? I am told the seats are different lengths.
    Thanks Boys
    Dwarf66, Jan 13, 2019
    #1

  2. visiteur1948 Husqvarna
    Pro Class

    Location:
    france Europe
    Husqvarna Motorcycle:
    husqvarna only
    yes !
    53 and 56 cm !
    because tank !


    4d6cd010.jpg

    1984 with tank 1983
    seat 1984
    visiteur1948, Jan 13, 2019
    #2
    Dwarf66 likes this.

  3. hva-factory CH Sponsor

    Location:
    uk
    Husqvarna Motorcycle:
    Husqvarna 510TE , 300WR Etc...
    If you need a new cover for the 84 seat, you can saw 30mm off the front of the seat FOAM.

    The seat base is the same and will not need cutting...

    Then just fit an 83 cover.

    The seat will be a little lower at the back than an 83 foam but it will work.

    Alternatively, we have all of the component parts in stock.

    Andy.
    hva-factory, Jan 21, 2019
    #3
    markt2 likes this.