Sorry mods for double post! Wrong subforum. Does any of you fine gentlemen have any left kick 610 parts lying around? I'm in need of a single and double gear for the input shaft unsure of the part numbers at the minute but I have them written down somewhere, i'l update the thread Completely rebuilding bike along with 100mm piston keihin 41, port and polish and a works crank So stoked on getting it back together but I'm at a loss for these 2 gears. I thought of getting a full box from eBay but there's a chance the gears will be the same. The dogs are worn where the gears meet. Please if anyone's got any lying around please please chime in. Support the cause of me chasing down some modern bikes lol Cheers Mork
Sorry only just seen this George. Thanks for the reply, however iv sorted the gear problem but another has sprung up lol. I bought a later (2001ish) brembo front caliper and it's a different mount, for the later marzocchis rather than my showas (94) Do you have any ideas on a brake caliper that could fit from a different bike? The brembo is out of my skillset! It wouldn't be a simple bracket My stock nisssin is toast and was far from the best at stopping before and going from 350ccs to 600 I need something with more oomph Let me know what you think Cheers ! Mork