510 TE 84 Gustavsson 4

Bored with aircooled ???
http://www.youtube.com/watch?v=7_5IiNWhjFs

I'm so bored with aircooled !!!
http://www.youtube.com/watch?v=J_F4H35KTf0

Some pics !

The construction.

Next step. Making the pipes.

Now I see how they changed the frame from the two stroke design for more room for the carburetor up high. I placed one of those engines in a two stroke frame of that vintage and it looked like I would need an offset intake or something.

Fran

just replace the rear frame strut,,,and use the factory husky aircleaner.. the carb clears ok, it sits too far back to use the 78-82 aircleaner assemblys, when you remove, shorten,and move it back about 6 inches, you can use the factory 510 air cleaner..you loose a little strength, but not enough to worry about unless your doing triples and mondo jumps..but at my age,.with a 260lb bike,,doubt thats gonna happen.

Paint in black!

Great Job Mr. Dufayardsson

The tank from Gruyeres ( CH) !!!
Thanks Plan-Plan for the special decals !

New valves,new piston, new rod,610 te ducati ignition, special connection between carb and headcylinder.

That's a sweet looking tank!

Michel,
That is some impressive engineering!! I bow down to your forethought and work!! Very cool!!
Rick

Michel,
Is this the same place or person that made this tank? I would be willing to part with a certain part of my anatomy for one!
Its' from post #126 at http://www.leguidevert.com/_V5/sujet-forum-81834-81834-0-8.html

Hello HVY
The monoshock alloy tank ( from guide vert) has been made by Kay Pernitzsch alias Svensbike in this forum ( Germany) for his bike.
About my tank , I've made the differents parts and it has been welded by a professionnal .

About tank, making this of the 400 wrlc was easier !

But why 510 Gustavsson # 4 ???

Yes, why ???

Because there 's already from left to right Gustavsson #1, #2, and #3 !!!