1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
    WR = 2st Enduro & CR = 2st Cross

250-500cc 360 PWK

Discussion in '2 Stroke' started by 2premo, Mar 9, 2024.

  1. 2premo Husqvarna
    Pro Class

    Location:
    Northern NV
    Husqvarna Motorcycle:
    98 WR360, 1987 WR430, 1988 XC430
    Other Motorcycles:
    Sherco 300, 2002 KTM 380EXC
    has anyone put a PWK on a 360?
    if so what were you settings
    FYI trying to set my 360 for 5000'
  2. flyingbob Administrator

    Location:
    USA
    Husqvarna Motorcycle:
    01&02WR360_02WR250_02CR250_12WB165
    Other Motorcycles:
    01 VOR400_07 TM450_22 GG250_07 Tuono
    Did you ever work this out?
  3. 2premo Husqvarna
    Pro Class

    Location:
    Northern NV
    Husqvarna Motorcycle:
    98 WR360, 1987 WR430, 1988 XC430
    Other Motorcycles:
    Sherco 300, 2002 KTM 380EXC
    looked at the jetting link and will be guessing from their results, so no but almost
  4. flyingbob Administrator

    Location:
    USA
    Husqvarna Motorcycle:
    01&02WR360_02WR250_02CR250_12WB165
    Other Motorcycles:
    01 VOR400_07 TM450_22 GG250_07 Tuono
    I'll be taking the Mikuni off of the 2002 WR360 soon and will let you know what I work out.
    I'm at 1,450' elevation.
  5. NvRider55 Husqvarna
    AA Class

    Location:
    N. Nv.
    Husqvarna Motorcycle:
    2001 wr360
    Other Motorcycles:
    KTM 525ex, 250xc 2T, 200sx,300mxc
    I was running a 38 from jd. 45p, 175m, jd biue neddle, 7 slide, as 1.5 out. 4600`. Ran strong, but went the Lectron route.
    2premo and flyingbob like this.
  6. 2premo Husqvarna
    Pro Class

    Location:
    Northern NV
    Husqvarna Motorcycle:
    98 WR360, 1987 WR430, 1988 XC430
    Other Motorcycles:
    Sherco 300, 2002 KTM 380EXC
    thanks for that had a Lectron years ago on my 99, loved it
    but putting a decompressor on and have the tube port ready to go
    not sure how to do that on a Lectron