2013 TE449 hot start and engine noise

Hey all, just seeing if anyone had any input. Similar situation as someone else except mine comes with an engine noise. Hot start issue on my 2013 te449. Starts fine when the bike is cold. When the bike is hot in summer, sometimes will not start unless I give throttle.Bike will also flame out and seem to run sluggish. Engine makes a slight timging noise sometimes when this occurs as well.

Mods. Race map
Fmf slip on

It's common to need a small amount of throttle on hot starts. There's also a common clutch rattle in these engines, much quieter in gear with the clutch pulled.
Both quire normal.

My hot start problems were soretedma bit after a PCV, butterfly, airbox mods and customer map. If you want my map let me know. I can dl and ul.

Im thinking some of the tinging may have been the fact all but two of the flywheel bolts backed out and took out stator and flywheel eventually. But yeah the bike likes to flame out when hot.

Do you still have the map? and how would I go about loading that?