1. 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     TE = 4st Enduro & TC = 4st Cross

2012 TE310R Clutch Slave Piston Replacement O-Ring Size?

Discussion in '4 Stroke' started by Jim S, Apr 19, 2017.

  1. Jim S Husqvarna
    AA Class

    Location:
    Orange County , CA
    Husqvarna Motorcycle:
    2013 TE310R
    Other Motorcycles:
    Yamaha FJR 1300
    Does anyone know the generic o-ring replacement size and material for a 2013 TE310R Clutch Slave Piston o-ring? I measured ID at 1 1/16" x 1/16" which corresponds to a metric ID of 23.52 mm x 1.78 mm. I see these premium Viton o-rings on ebay that withstand higher temperatures, better?

    Note: title says 2012 but it is a 2013. I don't see a way to change the title.

    http://www.ebay.com/itm/201731394211
    Jim S, Apr 19, 2017
    #1

  2. Jim S Husqvarna
    AA Class

    Location:
    Orange County , CA
    Husqvarna Motorcycle:
    2013 TE310R
    Other Motorcycles:
    Yamaha FJR 1300
    I installed a Viton 23.52 mm x 1.78 mm o-ring and did a test ride so appears to be the correct size. $6.75 for 25 shipped on eBay.
    Jim S, Apr 23, 2017
    #2