1. 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     TE = 4st Enduro & TC = 4st Cross

2011 TE250 FRONT FORKS?

Discussion in '4 Stroke' started by jetmani, Oct 1, 2017.

  1. jetmani Husqvarna
    AA Class

    Hey guys,

    I was riding on the weekend. rode into a rut and dropped the bike on the RHS.
    The bike now feels like it is pulling to the RHS, handlebars aren't bent and wheel isn't buckled.
    Can anyone suggest how I realign?

    THANKS!
    jetmani, Oct 1, 2017
    #1

  2. Dirtdame Administrator

    Location:
    Rock Springs Wy
    Husqvarna Motorcycle:
    11 WR300,13 WR125,18 FE501
    Other Motorcycles:
    17 Beta Xtrainer
    Probably twisted the front end via the triple clamps. Loosen the bottom tree bolts and whack the front wheel against something until it feels and looks straight again. Then retighten the bolts.
    Dirtdame, Oct 1, 2017
    #2

  3. Trenchcoat85 Husqvarna
    Pro Class

    Location:
    Northern NorCal
    Husqvarna Motorcycle:
    '14 TE 310R
    Other Motorcycles:
    '85 shovel, '75 DT400, '97 XR400
    ...and if that isn't it (aka tweaked forks), try loosening the rubber handlebar mounts under the top triple clamp (17mm nut head IIRC??) and then pull on the bars in the original direction. Tighten 'em back up after the bars settle into position.

    good luck.
    Trenchcoat85, Oct 1, 2017
    #3

  4. jetmani Husqvarna
    AA Class

    Thanks I'll give it a go on the weekend.
    jetmani, Oct 2, 2017
    #4