Having an issue with my bike not starting. Just did a valve adjustment, replaced the battery, and put an aftermarket head unit cause the old one rotted out and flooded from rain. Put the bike back together and it took 2 cranks and started up and ran fine. Ran it for a minute or so and shut it off. Let the bike sit for about 30min so I could finish putting the plastics and everything back on and after that couldn't get it to start again. Changed the plug and confirmed it had good spark. I can get it to turn over on starter fluid for a second but won't stay on. Checked the fuel pump and it is working. I did notice the priming wasn't as loud as it used to be when turning the bike on but it still pumps fluid just fine. Checked the valves again to make sure that I didn't mess up the adjustment and they are all within specs. Any ideas what's happening?