I've had an sm610 for a while but haven't used it in 4 years. Fixed all the oil leaks it had and now I'm at the point of getting it running. I've had the carb all cleaned and rebuilt but I just can't get it to tick over properly. I had to replace the tubing on top of the carb as the cable had worn through it. So I have a few questions if anyone could help pleaee: - anyone got a photo of where I should route the throttle cable? Or could tell me I think I've routed it wrong. - are there any generic settings on the carb I can try to get it to run how it should? I don't k ow where they should be set too. Thanks all in advance.
