1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
    WR = 2st Enduro & CR = 2st Cross

250-500cc 1993 CR360 ignition

Discussion in '2 Stroke' started by silverfox, Aug 7, 2023.

  1. silverfox Husqvarna
    AA Class

    Husqvarna Motorcycle:
    14 te 350
    Looking for an ignition for my 93 CR 360. Bike was running but died, and now have intermittent, and weak spark. If all the planets line up it will start and run fine, but will eventually die and not refire, been through all the normal fuel reeds etc related but convinced its spark issure. what other ignitions fit? or aftermarket as no listings for an 93 CR360. Will 250 work?
  2. flyingbob Administrator

    Location:
    USA
    Husqvarna Motorcycle:
    01 WR360_02 WR250_12 WB165_17 FC350
    Other Motorcycles:
    01 VOR400_07 TM450_22 GG250_07 Tuono
    Check with HPI in Belgium.
    International shipping is no problem.
    Very responsive when I needed a CDI
    silverfox likes this.
  3. 2premo Husqvarna
    Pro Class

    Location:
    Northern NV
    Husqvarna Motorcycle:
    98 WR360, 1987 WR430, 1988 XC430
    Other Motorcycles:
    Sherco 300, 2002 KTM 380EXC
    HPI will be your best bet, good luck finding an OEM that works after 30 years
    silverfox likes this.
  4. brian bush Husqvarna
    AA Class

    Location:
    Colorado
    Husqvarna Motorcycle:
    '93 WXC360, 2018 TC150
    Other Motorcycles:
    A few KTMs and Husabergs.
    I believe there is a stock ignition for a CR250 of that year listed on Ebay. I think it may be the same as was used on the 360 but have not pulled the parts lists to confirm. Maybe worth looking into though..
  5. 2premo Husqvarna
    Pro Class

    Location:
    Northern NV
    Husqvarna Motorcycle:
    98 WR360, 1987 WR430, 1988 XC430
    Other Motorcycles:
    Sherco 300, 2002 KTM 380EXC
    it has a different part number for sure
    don't know if it will work