1984 WR240 L/C Manual

Hi all,

Having trouble finding a Workshop Manual for the above bike which i have just purchased, can anyone help please.

The 86 motor must be nearly the same than 84 motor.

http://www.yourhusky.com/files/86-2t-shop-manual.pdf

You've got lot of stuff in vintage tech ref and parts.

http://www.cafehusky.com/forums/vintage-tech-ref-and-parts.66/

Good on ya Doug ! You have done the deal then .....

Let me know if there is anything else you want me to do.

ive got my original owners manual somewhere no good as a workshop manual.... but 400's identical so should be able to complete most tasks

I am in trouble in finding the original size piston for my 240 LC. Any advice from you guys ? Thanks

68.75m/m was the 240 standard size. No one bothers with these now, and 69.5, 70.0, 70.5, 71 and 71.5 pistons are all available and take you up to 250cc.

We have several used liners hanging around that range from 70 to 70.5 that anyone is welcome to for £20 each if you have run out of bore sizes (cause we use Nikasiled Alloy liners in the Factory bikes).


Andy

certainly have ian, thanks again for doing the leg work. will pick up later next week.

Let me know when you do, and you can pop round for coffee.