1. 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     TE = 4st Enduro & TC = 4st Cross

10 TXC 450 clutch master

Discussion in '4 Stroke' started by Yanns, Jun 14, 2017.

  1. Yanns Husqvarna

    Husqvarna Motorcycle:
    Txc 450
    Other Motorcycles:
    Triumph daytona
    I bought a 2010 TXC 450 that came with a Rekluse auto clutch setup. I want to put it back to stock and need a clutch master cylinder because the one on it that was being used for the rear brake is toast. The slave cylinder is in good shape with new seal. What master cylinder would work? Can I get a generic 9.5 Magura from amazon or ebay? The OEM magura from Husky is waaay too expensive. Thanks!!
    Yanns, Jun 14, 2017
    #1

  2. DEATH_INC. Husqvarna
    AA Class

    Location:
    Auckland NZ
    Husqvarna Motorcycle:
    TXC450 2009
    Other Motorcycles:
    1987 Honda CR500, GPZ 750 turbo
    Any one that is the correct size (or even close) will work. It is only a fluid pump after all.
    DEATH_INC., Jun 18, 2017
    #2