09 TXC 510 Carb Mod

Discussion in 'Zip Ty Racing' started by moreccsthanlbs, Aug 12, 2019.

  1. moreccsthanlbs Husqvarna
    AA Class

    Location:
    california
    Husqvarna Motorcycle:
    2009 TXC 510
    Other Motorcycles:
    1993 CR500
    Question, what does the carb mod consist of? A bunch of people say it is a must do...just curious before I pull the trigger on it. P.S....my suspension is magical, thank you
  2. Huskynoobee CH Sponsor ZipTy Racing

    Location:
    Castaic, CA
    Husqvarna Motorcycle:
    2011 TE449 2006 WR250
    Other Motorcycles:
    HDUltra Classic IT200 YZ250 SV650s
    Sorry for the delay. I've been traveling.

    Ty doesn't divulge all of his secrets, but he does make specific changes to make it run better all the way across the power band. He will pull it apart and replace orings and gaskets, adds a better drain plug and air screw, sets the float correctly and makes sure the vent tubes are fresh.

    Go to this page and fill out the form so you can send it in with the carb. You won't be disappointed.

    https://ziptyracing.com/pages/carb-mod-and-rebuild-ty-davis
    robertaccio likes this.
  3. moreccsthanlbs Husqvarna
    AA Class

    Location:
    california
    Husqvarna Motorcycle:
    2009 TXC 510
    Other Motorcycles:
    1993 CR500
    LOL...not lookin' for secrets, just a general description (which you gave...thank you). Guess I'll be gettin that done before the Viewfinders GP
    robertaccio likes this.
  4. robertaccio Husqvarna
    Pro Class

    Location:
    San Diego, Ca
    Husqvarna Motorcycle:
    2021 Husqvarna TE300i
    Other Motorcycles:
    99 HusqvarnaTE610, 94 Husaberg FC501
    Ty's been setting up FCRs since his Yamaha YZ450F winning days then throughout the Husqvarna days up until now.