1. 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     TE = 4st Enduro & TC = 4st Cross

09 510 TE throttle block

Discussion in '4 Stroke' started by paramedicmeyer, Apr 9, 2009.

  1. paramedicmeyer Husqvarna
    B Class

    Location:
    Fort Bragg CA
    Just got my new 09 510 te. At the dealer they said I could remove the throttle block but what they described looks nothing like what Im looking at. Also none of the other posts here look the same. Were there any changes from 08 to 09? Any help w/ pics would be helpful as bikes in general are new to me. Thanks
    paramedicmeyer, Apr 9, 2009
    #1

  2. WoodsChick Administrator

    Location:
    Oakland, CA Miramonte, CA
    Husqvarna Motorcycle:
    3 Terras, 2 `07 SM610s, `09 WB165,
    Other Motorcycles:
    KTM, GasGas, Suzuki, Honda
    Welcome to CafeHusky, paramedicmeyer :cheers: My sister lives in Fort Bragg and it's pretty much dualsport heaven there :thumbsup:

    I don't know anything about throttle blocks (throttle stop?) but I'm sure someone here can/will help you.



    WoodsChick
    WoodsChick, Apr 9, 2009
    #2

  3. HUSKYnXJnWI Husqvarna
    AA Class

    Location:
    Central Wisconsin, USA
    Husqvarna Motorcycle:
    09TE450
    • Take a look at the FI system on the right side of the bike- under the tank-
    • see the throttle cable cover- there's an allen head bolt holding it on- take it off.
    • look at the throttle wheel- loosen the cables - take the cables off- or loose enough to get around them with a screw driver-
    • see the two Phillips head screws- they hold on the throttle stop plate- take them off- now take the plate off- put the two screws back in -
    • tighten the cables- so there's just a little slack- check that it returns well and adjust as needed- put the cover back on- then throw the throttle stop plate in a box.:thumbsup:
    HUSKYnXJnWI, Apr 9, 2009
    #3

  4. SoCal_250 Husqvarna
    B Class

    Location:
    San Diego CA.
    I just bought an 09' SMR - noticed this throttle stop, the dealer will hopefully take all the restricted parts off.
    SoCal_250, Apr 9, 2009
    #4

  5. gearstace Husqvarna
    A Class

    Location:
    Idaho
    here is a pic

    here are some pictures of my 09' I just took off, I hope this works/helps.
    gearstace, Apr 10, 2009
    #5

  6. paramedicmeyer Husqvarna
    B Class

    Location:
    Fort Bragg CA
    could you repost that pic. it didnt come through
    paramedicmeyer, Apr 10, 2009
    #6

  7. ioneater Husqvarna
    AA Class

    Location:
    NW Texas
    Husqvarna Motorcycle:
    2010 TXC 250
    Other Motorcycles:
    08 Sprint
    With stop installed, circled.[IMG]

    With stop removed. HTH
    [IMG]
    ioneater, Apr 10, 2009
    #7

  8. Coffee CH Owner

    Location:
    Between homes - in ft Wayne IN
    Husqvarna Motorcycle:
    2006 TE250, 2013 TR650 Terra - sold
    Could someone confirm what year bikes those pics are relevant to?

    2008/2009 TEs?
    Coffee, Apr 10, 2009
    #8

  9. ioneater Husqvarna
    AA Class

    Location:
    NW Texas
    Husqvarna Motorcycle:
    2010 TXC 250
    Other Motorcycles:
    08 Sprint
    That's from my '08, bet '09s are the same or close enough to figure it out.
    ioneater, Apr 10, 2009
    #9

  10. Coffee CH Owner

    Location:
    Between homes - in ft Wayne IN
    Husqvarna Motorcycle:
    2006 TE250, 2013 TR650 Terra - sold
    Well if we can establish some reasonably concrete information then you can start up a new thread and I can add a copy to the tech ref section cause the topic is going to come up again.

    You do want to see your name in lights don't you?


    Just noticed this thread is in the common topics section...

    common topics --->>> 4st.
    Coffee, Apr 10, 2009
    #10

  11. ioneater Husqvarna
    AA Class

    Location:
    NW Texas
    Husqvarna Motorcycle:
    2010 TXC 250
    Other Motorcycles:
    08 Sprint
    Nah, just want to help somebody else much like your valve check video did for me. Haven't heard of any physical changes on the Mikuni throttle bodies between 08 and 09 so am ASSuming they're at least similar in configuration. :)
    ioneater, Apr 10, 2009
    #11

  12. HUSKYnXJnWI Husqvarna
    AA Class

    Location:
    Central Wisconsin, USA
    Husqvarna Motorcycle:
    09TE450
    Yes- its the same as my 09TE450.
    I just gotta see Ioneater's name in lights. Coffee, See what you can do!:busted:
    HUSKYnXJnWI, Apr 11, 2009
    #12

  13. paramedicmeyer Husqvarna
    B Class

    Location:
    Fort Bragg CA
    I can confirm that it's exactly the same as the 09 510 TE. Just pulled mine off and it's identical. No thanks to the smart dealer who told me it was on the opposite side. Could anybody comment on what to loosen to move the throttle caboe out of the way. At the tube or directly in the box?
    paramedicmeyer, Apr 11, 2009
    #13

  14. Coffee CH Owner

    Location:
    Between homes - in ft Wayne IN
    Husqvarna Motorcycle:
    2006 TE250, 2013 TR650 Terra - sold
    That is what 'your name in lights' means - filing threads away to help the next person.

    Question - what does "HTH" mean in reference to the second pic?

    Done! Here is a new thread,
    http://www.cafehusky.com/forums/showthread.php?t=2592

    and I put a copy in the Tech Ref section. Just keep posting to this thread and someone a year from now will wake the other thread up if they have a question. This thread is a bit cluttered now.



    Thanks!
    Coffee, Apr 11, 2009
    #14

  15. ioneater Husqvarna
    AA Class

    Location:
    NW Texas
    Husqvarna Motorcycle:
    2010 TXC 250
    Other Motorcycles:
    08 Sprint
    I loosened the cables down at the throttle body by backing off the jamnuts and swagged it when retightening ensuring full throttle travel could be achieved.

    Coffee,

    HTH=Hope This Helps
    ioneater, Apr 11, 2009
    #15

  16. Coffee CH Owner

    Location:
    Between homes - in ft Wayne IN
    Husqvarna Motorcycle:
    2006 TE250, 2013 TR650 Terra - sold
    LOL

    :lol:

    Yeah some of us are old... I'll go spell that out.
    Coffee, Apr 11, 2009
    #16