1. 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     TE = 4st Enduro & TC = 4st Cross

'08 TE250 kickstand length needed

Discussion in '4 Stroke' started by BigShooter, Aug 16, 2016.

  1. BigShooter Husqvarna
    B Class

    Husqvarna Motorcycle:
    te250
    The PO lowered the bike with Kouba Links, and cut the end off the kickstand in the process. Can somebody tell me what the length of theirs is, from the pivot center to end, so I can fabricate a new end on mine? Thanks
    BigShooter, Aug 16, 2016
    #1

  2. Jimmy250 Husqvarna
    AA Class

    Location:
    North Jersey
    Husqvarna Motorcycle:
    2010 TE 250
    Other Motorcycles:
    Polaris Quad
    Hey I have a 2010 TE 250 that is lowered I have the stock kickstand on it still I can measure it later for you. Jim
    Jimmy250, Aug 18, 2016
    #2
    BigShooter likes this.

  3. BigShooter Husqvarna
    B Class

    Husqvarna Motorcycle:
    te250
    I'd appreciate it
    BigShooter, Aug 23, 2016
    #3

  4. Jimmy250 Husqvarna
    AA Class

    Location:
    North Jersey
    Husqvarna Motorcycle:
    2010 TE 250
    Other Motorcycles:
    Polaris Quad
    Sold the bike last night But my friend has the same bike I will get the measurement from him Stand By
    Jimmy250, Aug 24, 2016
    #4

  5. gtluke Husqvarna
    B Class

    Location:
    North Jersey
    Husqvarna Motorcycle:
    2010 TE250
    Other Motorcycles:
    just sold them all
    16" to the mounting bolt.
    Hi Jim!
    [IMG]

    [IMG]
    gtluke, Aug 24, 2016
    #5

  6. Jimmy250 Husqvarna
    AA Class

    Location:
    North Jersey
    Husqvarna Motorcycle:
    2010 TE 250
    Other Motorcycles:
    Polaris Quad
    16" is the stock length of the stock kick stand.
    Jimmy250, Aug 24, 2016
    #6
    BigShooter likes this.

  7. BigShooter Husqvarna
    B Class

    Husqvarna Motorcycle:
    te250
    Awesome! Thanks alot. I was fixing to go off the one on my XRR that is 15"
    BigShooter, Aug 25, 2016
    #7

  8. Jimmy250 Husqvarna
    AA Class

    Location:
    North Jersey
    Husqvarna Motorcycle:
    2010 TE 250
    Other Motorcycles:
    Polaris Quad
    Hey Luke good to see you on here!!!
    Jimmy250, Aug 26, 2016
    #8

  9. vmxwinn Husqvarna
    AA Class

    Location:
    East of San Francisco, Danville CA
    Husqvarna Motorcycle:
    CR500,CR430,XC430,OR250,WR400,TE250
    Other Motorcycles:
    To many to list
    Inquiring minds would like to know if one can use the newer aluminum kickstand on an older, 2007, TE. I'm at n the same boat where th previous owner, my brother, lowered the bike and had someone cut and re weld the kick stand making it shorter.
    vmxwinn, Aug 30, 2016
    #9