1. 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     TE = 4st Enduro & TC = 4st Cross

07 Husky TE 510 Hand Guard Fitment

Discussion in '4 Stroke' started by VTMTcowboy, Mar 16, 2019.

  1. VTMTcowboy Husqvarna
    A Class

    Husqvarna Motorcycle:
    2007 TE 510
    Other Motorcycles:
    97 KDX 220, 04 KDX 200, 82 XT 250
    Just tried mounting up a set of Ascerbis Uniko hand guards and having trouble on the left side due to the hot start lever. To make it fit, it seems you have to have the clutch lever almost vertically which isn't too practical. Been searching the picture thread to see if anybody with an 07 is using non-wrap style hand guards besides the stock ones. Would rather no go full wrap, but that may be the only option. Any help is greatly appreciated. Thank you.
    VTMTcowboy, Mar 16, 2019
    #1