I am looking for some jetting input for my 06 TE610. I just installed a Leo Vince X3 Enduro Slip on Exhaust. My jetting is stock. I ride at about 1000 FT MSL. I have not tried it yet, I put high temp sealant on the exhaust pipe/slip on connection and I want to wait overnight for it to dry before I try it. Any input? Thanks, Singletrak
I know it was a while ago but how did you go with this setup? I was also thinking of using these jets. I also hear using a #60 leak jet is the go. I had issues with dirty fuel recently and got the bike shop to pull down and inspect. If I was more organised I would have had the jets ready to put in. They wrote down the jets I have and I found that everything is still stock. I would imagine buying these 2 jets would be heaps cheaper than buying the JD kit as I hear their jets are stock parts anyway. Their needle is the only reason you buy the kit???