• 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

250-500cc wr360 help

F

Foggy

Husqvarna
hi, i just purchased a 96 wr360 and iv'e got a couple qustions & issue to resolve, any advice would be really appreciated;

1. can these have pillion pegs fitted?
2. the bike starts and idles fine but as soon as you give it more than half throttle there s nothing. the guy i bought it from said that he cleaned the carby. could it be power value? if so how do i sort that (ive only done basic work on bikes n the past).
3. what fuel mix do these run best on and do they need 95+ fuel?
4. where can i download a manual.

thanks all, this looks like a great forum and look for to be part of it.

regards,
mark
 
yeh, check the power valve is opening properly by removing side cover also make sure reeds are good and carb is clear of debris, the powervalve valve actuating arm and plate can be installed back to front this will bind on the cover and not open correctly, i think you can download a pds w/shop manual from the husky web site.
 
You must log in or register to reply here.
Back
Top