Hi fellas.. I have just put a fresh top end in my 2011 wr300. Have read a little about setting the powervalve at 50. 5mm as opposed to 48mm recommended in the manual.. Has anyone else made this adjustment and is it valid for giving a bit more bottom end ? Do you lose up top? And does it cause any problems ie overheating or plug fouling etc.. There is a bit of a thread on here already i know but most of the bikes were pre 2011 models.. Any help would be great b4 i fire the bike up
-
Hi everyone,
As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.
When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.
Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.
Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.
Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.
Thanks for your patience and support!
250-500cc Wr300 power valve setting
- Thread starter DINGA300
- Start date