• 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
    WR = 2st Enduro & CR = 2st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

250-500cc WR 360 Top End...torque specs?

kerlinger

Husqvarna
AA Class
Planning on doing the top end on my 2001 WR 360, first two stroke i've own since RD 350 back in the '80s...thought the manual i have would provide info on how to do this...but more importantly there are NO torque specs...
anyone have recommended specs i can use?

thank you,

Kirk
 
thanks...i have this also the original manual....but i don't see torque specs listed anywhere? i must be blind
 
Sorry mate, it's the owners manual info below

Application Thread |Nm | Kgm | Lb/ft
Cylinder nut M10x1.25 | 21.6-24.5 | 2.2-2.5 | 15.9-18.1
Cylinder head nut M8x1.25 | 17.6-19.6 | 1.8-2.0 | 13-14.5

The manual is hard to find these days so PM me and l can email it to you?
 
Back
Top