• 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

125-200cc WR 125 Cuts out, help please!

Robin Wallerman

Robin Wallerman

Husqvarna
Hi, I've had a problem with my bike for like a month now and it's starting to drive me crazy to not ​
being​
able to ride! ​

So the problem is that my Husqvarna WR 125 ( 2011) cuts out when it gets warm, mostly after maybe 10 minutes of riding, sometimes it takes a little longer, like 20min. It works perfectly untill then, and when it has cooled of it fires back up again. ​

I think it is something electrical but I'm not sure where to look, I've tried changing the voltage regulator ( Side note, this is an offroad bike with a lights etc), and it ran for a little longer, but then same thing, it stalled. ​

When it dies the spark goes away, I've cleaned all the electrical contacs, head plug etc, checked the cables for damaged but it's nothing like that. ​

I'm asking you guys for help in hope that you've heard someone or had the sam problem, and if you have an idea of what the problem could be, please don't hold back! ​

Thanks in advance.​
 
Replace the cheap stuff first.

spark plug
whole coil...get one off ebay...or you buddies bike.
Stator and pulsor.

BTW, the voltage regulator should have nothing to do with the ignition.
 
Whats your location? there may be another wr125 owner near you that would be willing to swap parts to test with. Failures after heat buildup would lead me to believe its electrical. Start simple.... reseat the spark plug cap, check all connections for corrosion or loose connections, kill switch wiring, etc. Start simple!!
 
I know you said you checked the cables, but my bike was doing something similar last year.. It ended up being a grouding issue. Check your grounds!!!
 
ensure you have a resistor plug in. Should not need with an analog ignition but for some reason will break up on top with a non resistor plug
 
Observe the spark when cold and then again once the problem starts happening. At least that way if there is a noticeable difference you know it's a spark issue.
 
You must log in or register to reply here.
Back
Top