RodKnock
Husqvarna
Hello, I have a bit of an issue i hope i can get some help here.
So, my friend had a 2014 Husky TE125 that was converted to motocross, so all of the wires were clipped off. I needed a speedo, so he gave it to me but it has all of the connectors clipped off and my 'varna has different colours for the wires.
I have found wires that correspond to the speed itself and gotten them soldered, that works, but i cant come to a understanding what wires on the speedometer itself correspond to the high beam and turn signal on indications.
There are 8 wires coming out the back of the speedo (black, red, orange, green, brown, purple, blue, white), I hope someone here knows what each wire does and/or has an electrical diagram.
So, my friend had a 2014 Husky TE125 that was converted to motocross, so all of the wires were clipped off. I needed a speedo, so he gave it to me but it has all of the connectors clipped off and my 'varna has different colours for the wires.
I have found wires that correspond to the speed itself and gotten them soldered, that works, but i cant come to a understanding what wires on the speedometer itself correspond to the high beam and turn signal on indications.
There are 8 wires coming out the back of the speedo (black, red, orange, green, brown, purple, blue, white), I hope someone here knows what each wire does and/or has an electrical diagram.
