Wheel Bearings

[Mercury264]

I searched but didn't find anything

Does anybody have the dimensions for the wheel bearings (front and rear) for a 2007 TE510 ? Mine are toast and I'd prefer to buy replacements from a local bearing shop if possible instead of using the All Balls kit.

TIA

Cheers

 

[Colo moto]

25 x 42 x 9 mm.

https://www.halls-cycles.com/Catalog/PDF/Husqvarna .PDFs/2006/2006-DOHC-Husky-parts.pdf

edit: oops, sorry, didn't read well enough to see you were asking for front and rear. Got front only stuck in my head for some reason.

 

[Fat Tire Flyer]

For rear wheel you will need 3 bearings per below..

Qty 1 X Husqvarna Part #: 8B00 26846 / 63005-2RS / ø25xØ47x16 mm
Qty 2 X Husqvarna Part #: 8A00 26846 / 6005-2RS / ø25xØ47x12 mm

For front wheel you will need 2 bearings per below.. :ride:

Qty 2 X Husqvarna Part #: 8000 84938 / 6905-2RS / ø25xØ42x9mm



NOTE: Older front wheels used this bearing..

Qty 2 X Husqvarna Part #: 8000 39651 / 6004-2RS / ø20xØ42x12mm

 

[Mercury264]

For rear wheel you will need 3 bearings per below..

Qty 1 X Husqvarna Part #: 8B00 26846 / 63005-2RS / ø25xØ47x16 mm
Qty 2 X Husqvarna Part #: 8A00 26846 / 6005-2RS / ø25xØ47x12 mm

For front wheel you will need 2 bearings per below.. :ride:

Qty 2 X Husqvarna Part #: 8000 84938 / 6905-2RS / ø25xØ42x9mm



NOTE: Older front wheels used this bearing..

Qty 2 X Husqvarna Part #: 8000 39651 / 6004-2RS / ø20xØ42x12mm

That is just what I am looking for

Thanks a lot

 

[Pete]

Thats awesome info. Any ideas if its true for 05 and 08 TE450 ?

Any ideas where to buy online, or, in Australia?

 

[Colo moto]

Pete,

The wheel bearings should be the same for both your 2005 and 2008. You can cross reference here to be sure though.

https://www.halls-cycles.com/Catalog/Halls-Cycles-Husqvarna.aspx

Wheel bearings come in standard sizes. They are not a moto or brand specific part, so any reputable auto or industrial supply company should be able to get them. Just make sure to get sealed bearings and not a cheapo brand either.

 

[ghte]

Pete, any decent bearing shop will have what you need they only require ID, OD and width.
As said get quality sealed bearings from Europe or Japan (SKF). There is a great post from Seahorse here about repacking new bearings before inserting them (excellent photos etc) as they come with inadequate grease from the factory. You will find it about 12 lines down in the technical reference section.

 

[Pete]

I already ordered them before i read this...not sure of the brand, but husky australia quote was $300 per bike, i paid $32.50 delivered. Will post the brand once they arrive.

 

[Mercury264]

Nearest bearing shop is 30 miles away or so from me so in the end I just ordered the Alls Balls kit.

 

[Dirt_drifter]

For rear wheel you will need 3 bearings per below..

Qty 1 X Husqvarna Part #: 8B00 26846 / 63005-2RS / ø25xØ47x16 mm
Qty 2 X Husqvarna Part #: 8A00 26846 / 6005-2RS / ø25xØ47x12 mm

For front wheel you will need 2 bearings per below.. :ride:

Qty 2 X Husqvarna Part #: 8000 84938 / 6905-2RS / ø25xØ42x9mm



NOTE: Older front wheels used this bearing..

Qty 2 X Husqvarna Part #: 8000 39651 / 6004-2RS / ø20xØ42x12mm

Thanks for the info. Do the two strokes use the same size?

 

[STEVEL]

Hi what about seal sizes front and rear anyone?

 

[Stefan NZ]

For rear wheel you will need 3 bearings per below..

Qty 1 X Husqvarna Part #: 8B00 26846 / 63005-2RS / ø25xØ47x16 mm
Qty 2 X Husqvarna Part #: 8A00 26846 / 6005-2RS / ø25xØ47x12 mm

For front wheel you will need 2 bearings per below.. :ride:

Qty 2 X Husqvarna Part #: 8000 84938 / 6905-2RS / ø25xØ42x9mm



NOTE: Older front wheels used this bearing..

Qty 2 X Husqvarna Part #: 8000 39651 / 6004-2RS / ø20xØ42x12mm

Hey you wouldn't happen to know where I can find the wheel bearing and sprocket carrier bearing sizes for the 701E?
I've searched a while but no luck yet...

 

[ghte]

Try R&D Husqvarna in Sydney. Ask for Stephan-you have a name in common at least.