• 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

All 2st What plastics and decal kits will fit 07 wr 250

R

Rsu181

Husqvarna
Just picked up a 2007 wr 250 that needs a bit of work just wondering if the plastics off other bikes will fit I want to get rid of the headlight and have a number plate with decal and will be replacing all other plastic just for a fresh look
 
I think 2006 to current.Check motoplastics.com they have a good color selection.
 
All the wr250 and 300 plastic and graphics will fit from 06 to current. Also all the cr/wr 125 and four stroke plastic will fit from 06 to 08. All front fenders will work. There are only two styles of lower radiator covers that I know of, just get the older two stroke ones for your bike they are cheap. I think all the upper shrouds are the same. As far as graphics the lower radiator shrouds differences between your bike and the newer framed bikes will probably be the only difference. Maybe a slight difference in the rear number plates, you may even be able to make them work. As far as fenders, upper shrouds, front number plates they will all interchange. This obviously excludes the new 449/511, 630. Hope this helps
 
Actually rear number plates are quite a bit smaller on the newer bikes. They came with the new 250 4 stroke and 125 frame. Graphics probably wont work.
 
You must log in or register to reply here.
Back
Top