• Husqvarna Motorcycles Made In Sweden - About 1988 and older

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

Weird 82 Ohlins Shock issue

1982 XC 430

1982 XC 430

Husqvarna
AA Class
Ok so yesterday I went for my first real ride on my 82 250 XC. What a Ride! So I had a few issues. I lost one of the lower Shock bolts and the Shock Slipped off the Swing Arm. I wasn't far from the Truck so I just limped it back. Oddly enough the Remaining Shock stayed in a compressed state all the way back home till I put the Bike on a Stand and then it relaxed. I removed the other Shock and noticed that it was only about 1/2 way exstended. So I removed the Spring ( thats fun on a compressed shock) and tryed to extend it with a Hamer and Punch and it wouldn't budge. Figured I had bent the Shaft right. Well by pulling on it and twisting the body for 20 minutes I was able to extend it all the way! This is after a Spring under tension couldn't do it in 24 hrs! Now that its extended it goes in and out by hand just fine. OK so I had a local Shock guy who has never done a pair of twin shocks go threw them and replace the oil and charge them back up a Year or so ago. Could a Piston Seal be in backwards and allow the Oil to get on the wrong side? I need to ride this bike this Weekend and don't have time to ship them off so do I open them up or just put the Spring back on??
 
There might be in the tech reference section? I have a Ohlins book but no scanner. I thought someone had a PDF of one. Ask Husky T.
 
OK so I strayed away from the Cafe and searched the Web only to find everythin I needed right here on the Cafe! ' Twin Shock Piggyback Ohlins Rebuild" answered all my questions and had the manuals with Drawings. Well almost all my questions, if I remember corectly one shock is for Compression and one is for Rebound. My Shock bodys are Labeled Left and Right but they are backwards as to wich fits the bike. I'm wondering if any internal parts are switched between the two.
 
There are no internal difference in the shocks Left to Right. A few thoughts share.

1. I lost a shock once and bent the swingarm in the process. You should check this too.
2. If you blow the N2 charge, you can check if the shaft is bent by turning the shaft once it is free from pressure. A bent shaft is junk, if I recall correctly run-out is .002" max. It will cause offset wear to the internal shock body in time that can't be honed. They are not cheap.
3. The 1st plate in the compression shim stack has bypass holes in it. I believe the 82 used a plate with 4 holes. These holes flow oil no matter what. If the shock is sticking from hydraulic lock, it implies something is blocking the bypass holes. Disassembly is required.
4. These shocks are not difficult for a novice with mechanical experience to rebuild. It does require a little forethought and care. The old style seal heads used 3 retaining clips, the new style only uses two.

Regards,
PC
 
Thanx for the Heads up. I took the Shock back to my local rebuilder and we took it apart on the spot. Armed with my Drawings we compared everything as to the order of assemby and we found one washer that might of been in up side down by looking at the wear marks. Didn't really look like it would make much diffrence. We Chucked up the Rod and it had little or no run out. Anyway its all back togeather and time to try it again.
 
To the best of my knowlegde, it does not matter which way the valve stack shims are installed as far as there being a top or bottom. Diameter size and order of course is important as is individual shim thickness and these should match on both shocks

Regards,
PC
 
Need help identifying this bike and all of its parts it's what I believe to be a 81 390 XC block number 2080 40 mm Forks larger tank need to ID twin piggyback shocks
 
bamboozler said:
Need help identifying this bike and all of its parts it's what I believe to be a 81 390 XC block number 2080 40 mm Forks larger tank need to ID twin piggyback shocks
Click to expand...


Maybe start a new thread bamboozler, this one hasn't been active in over 6 years!
 
I apologize to all concerned and appreciate all who replied obvious first ever forum by the haisty placement of my post
 
You must log in or register to reply here.
Back
Top