2010 TE250' this time last week I went for a short ride, filled up the bike at the petrol station then rode home and parked it up, running perfectly.
Today I jumped on the bike, started up on the button but would would bog down when I revved it, would stall as soon as I pulled the clutch in to change gear, then fire straight back up when I let it out (roll start). The bike still had plenty of power but would hesitate down low.
I recently put the txe ECU and 12 point injector in but that was 200kms ago. I've drained the fuel and will put some fresh stuff in but could it be anything else, considering I haven't ridden it and last time I did it was perfect.
Today I jumped on the bike, started up on the button but would would bog down when I revved it, would stall as soon as I pulled the clutch in to change gear, then fire straight back up when I let it out (roll start). The bike still had plenty of power but would hesitate down low.
I recently put the txe ECU and 12 point injector in but that was 200kms ago. I've drained the fuel and will put some fresh stuff in but could it be anything else, considering I haven't ridden it and last time I did it was perfect.