• Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

TE-510 OEM chain manufacturer

Runner

Runner

Husqvarna
AA Class
I went to buy a master link for my 510 from Renthal and was told that master links to 520 O-ring chains are non-interchangeable, and that I need to know which firm made the chain. Could this be BS? If not, maybe one of you wizards know which firm made the OEM chain, allowing me to get the correct link.
 
I couldn't find any markings on the stock chain I had on my TE450 either (I had originally thought that it was a Regina), but it lasted 6000 miles. If you can take your stock master link in to the store with you, the people there could probably match it up to some brand that they have in stock.
 
Runner;112201 said:
I went to buy a master link for my 510 from Renthal and was told that master links to 520 O-ring chains are non-interchangeable, and that I need to know which firm made the chain. Could this be BS? If not, maybe one of you wizards know which firm made the OEM chain, allowing me to get the correct link.
Click to expand...

per Rick Ramsey's measurements- various brands and models have slightly different widths. But you may or may not see an issue-less the fact that the master may not allow to be clipped properly or kink if too narrow- tight.
 
It turns out that the some chain manufacturers stamp their name on the side links. The problem is that not all the links get stamped. I ended up having to clean the grunge off five links before I found the manufacturer's name.

For 2006, Husky used Regina and DID. Both replacement links are given unique part numbers in the dealer's stock book. My bike had a Regina chain, which my local dealer carried the master link for. Issue over.

Thanks Dirtdame and HUSKYnXJnWI for the suggestions.
 
I'm going to remove the chain to completely clean it. What solvent should I use on it to clean it without damaging the o-rings? WD-40? Acetone?
 
Just spoke with Mototsportz Mike about this...

there were 2 chains used regina or CZ... good luck finding a ML for the CZ
 
I use kerosine to clean my chain then wash it it warm soapy water, blow off the water and put on a chain lube. Some guys just use WD40 to stop surface rust. The thought being that the "O" ring chains are already lubed. I put mu link pin on the inside as it resits swiping the frame a tad more.
 
Last night I cleaned it in Simple Green and soaked it in SAE 20W-50. It will get some chain lube before the next ride. The Simple Green worked well.

Thanks all for the replies. QED.
 
You must log in or register to reply here.
Back
Top