• 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

All 2st Subframe help

bhima

bhima

Husqvarna
A Class
Will a husqvarna sm 125 rear subframe from a 07 bike
fit my wr 250 04?
i destroyed my subframe on my wr 250 04. i got a frame from a 4st and was told it would fit. it didnt. it had to be modified in height and it is wider so my panels dont fit properly. i need to fit a new exhaust and that will need to be modified to so i hope i can find a sub frame to fit, and plastics and can
 
It should, but it may be missing side panel bolts holes. Those can be added with rivet type thread inserts.
 
thanks
another post said '06 and up has the same sub-frame for the WR250/300. 2000-04 will work but the end holding the back of the fender are shorter and don't support the new fender quite as well.''
are the 125s the same as the 250/300s?
are the sm the same as the cr wrs?
 
There are variations in them from 2000 to '06, but basically they will bolt to the main frame. I think '02 to present are very very close, but I'm not 100% sure of all the little details, but someone with a little savy will be able to work with it. I had a '02 CR250 subframe on my '07 WR250 and you couldn't tell any difference other than the shorter fender supports and I think SM are the same as WR.
 
You must log in or register to reply here.
Back
Top