• 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
    WR = 2st Enduro & CR = 2st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

250-500cc Steering lock barrel WR300

Birky_41

Husqvarna
C Class
Can anyone give me the part number or one that'll work? I've found on chat gpt 78003035100

It's a Zadi ignition barrel. I bought a master key after being told it would work... But it didn't

When I bought the bike he didn't have the steering lock key and it bugs me so I want to get a new one in there

20251010_152227.jpg
 
I think Husky part number is H800043391 but it looks unavailable...

I checked the part diagram of my actual Beta RR300 2019 and it list this as H800043391 , I found this picture:

I never replaced one of those but you need to remove that pressed in pin, not sure if it is possible to get it out with some good gripping pliers , probably not for safety reasons , maybe you need to cut it flat and then carefully drill it out, put the new barrel in and hammer a fresh pin in...
 

Attachments

  • 28.85861.000.jpg
    28.85861.000.jpg
    20.6 KB · Views: 1
I think Husky part number is H800043391 but it looks unavailable...

I checked the part diagram of my actual Beta RR300 2019 and it list this as H800043391 , I found this picture:

I never replaced one of those but you need to remove that pressed in pin, not sure if it is possible to get it out with some good gripping pliers , probably not for safety reasons , maybe you need to cut it flat and then carefully drill it out, put the new barrel in and hammer a fresh pin in...
Appreciate the help. I need to see if I can remove or go to a specialist. It's getting the right bit to go back in after though
 
Back
Top