Steering Damper Sale - Cafehusky special

[Motosportz]

Cafehusky special

I just built a huge inventory of 08 and up 250/450/510 style dampers and want to move them. Will do $380 shipped which is $60 off (including shipping). Just Email me and let me know you saw this post and your good to go. Limited time.

 

[xymotic]

Kelly, why do you hate 610's?

 

[Motosportz]

Kelly, why do you hate 610's?

You shamed me into it. Same deal. Bring it.

 

[mtne]

Kelly, why do you hate 610's?

Glad it was someone else this time...........

Edit: Just went to look.......... you do hate 610's.......... no underbar mount? Sigh.

 

[bbcmat]

I have the IMS 3 gallon tank (09 TE510) - will this damper fit?

MAT

 

[Swampds]

What about the 07's, will these fit?

 

[rajobigguy]

You shamed me into it. Same deal. Bring it.

Oh sure, I spend the last year and a half singing prasies and promoting the product and you give the new guys the big discount. Oh well at least I get to say that I was one of the first.

 

[Motosportz]

Oh sure, I spend the last year and a half singing prasies and promoting the product and you give the new guys the big discount. Oh well at least I get to say that I was one of the first.

Your always going to piss someone off with a sale. I think I have given you some good discounts. Your a great customer and I'll make sure I do right by you in the future as well. Thanks man.

 

[rajobigguy]

Your always going to piss someone off with a sale. I think I have given you some good discounts. Your a great customer and I'll make sure I do right by you in the future as well. Thanks man.

No worries Kelly, You've always done fine by me. I just couldn't resist that one.

 

[bbcmat]

Does it fit a ims tank?


Mat

 

[Joliet]

Does it fit a ims tank?


Mat

Mat, mine does not fit with my IMS tank. I only got to use my Motosportz damper for a few months in 08 until I got my IMS tank. I really liked the damper and have been waiting for a year and a half for someone to come up with a mod so that I can use it again. Until then, it is the coolest paper weight ever..... Ken

 

[jmetteer]

I have the IMS 3 gallon tank (09 TE510) - will this damper fit?

MAT

Nope.

No one has a damper kit that will work consistently with the IMS tank.

Later,

 

[Joliet]

Nope.

No one has a damper kit that will work consistently with the IMS tank.

Later,

I think George has one now.

 

[Coffee]

I think George has one now.

I really don't know. But this is the Motosportz forum, he is having a sale on his products, and it would probably be much better to discuss the relative merits of different brands somewhere else. Common topics, 4st, something like that.

 

[rajobigguy]

Here is a copy of a review that I did on the Motosportz damper. It might be of some help if the discount isn't enough to convince you to open the purse strings or you're on the fence about needing one.


I purchased a steering damper for my TE610 Husky and wanted to share my thoughts with everyone.

Although this report is pretty specific to the 610 I believe that much of it would be pertinent to other bikes.

Right out of the box there are a couple of things that I noticed.
1. This thing is a work of art, gorgeous by any standard. The machining and finish is aircraft ( maybe aerospace ) quality.

2. Very light weight. Actually it is surprisingly light. I would have thought that the additional hardware needed to adapt to a 610 would have made the unit heavy but it is probably one of the lightest dampers that I have ever seen.

Installation:
Coming up with a clean mounting solution for the 610 took a bit of creativity on the manufacturers part. The 610 has almost no room between the gas tank and the head stock and until now the only viable alternative to mounting a damper was to purchase one from one of the other companies, change to an after market gas tank and do a bit of fabrication to mount the stationary pin. Motosportz has come up with a clamp that attaches to the upper headstock mount and goes around the factory gas tank.

The damper itself is a relatively simple mount up. All that is required is to remove the two top handle bar clamps and install the damper mount in thier place. The damper is secured to the mounts by two screws in a sliding bracket. The stationary pin mount requires you to remove the gas tank and slip the yoke of the clamp over the nose of the tank and drop the tank back into position. There are a couple of things to watch out for here. It seems that Husky may weld the hold down bolt for the gas tank in a nominal location rather than a precision one. I would recommend doing a trial fit of the clamp without the gas tank in position to make sure that the clamp is not rocking on any excess weld on either the headstock or tank hold down bolt. That was the case with mine but was easily rectified once I understood what was going on. It only took a few swipes with a heavy file to to smooth the mounting surface. I have since talked to the people at Motoportz and they said they would include a recommendation to do a trail fit in the instructions.
That brings us to the next point which is dealing with the people at Motosportz. What a great group of guys they have there, very helpful, they are real riders who understand what our needs are and share the same enthusiasm about bikes that we have.

Performance:
It took a few days before I had the opportunity to get it dirty but in the mean time I did do some street riding and even there it made a difference.
While the big Husky is a very stable bike to begin with, adding the steering damper allowed me to raise the fork tubes in the triple clamp to the next notch with out losing any high speed stability. Being able to tighten up my steering radius without losing high speed stability justifies the purchase all by itself but it doesn't stop there.

At lower speeds in the sandy stuff it is less of a fight to keep the bike pointed in the right direction and it tracks better in the rough at higher speeds. I tried bouncing sideways off some sharp edged obstacles and it is much less of a chore to recoup. Turn-in is much smoother and more predictable. It seems to have a non linear resistance built in to the sweep and gets progressively easier the farther away from center that you move.
The adjustment is a single lever and can go from almost nothing to really stiff. I found that running mine in the midway point was about right for me. It probably has more adjustment than most people will ever use but I guess it might be nice to have in some situations.

Overall this is an outstanding unit and if you are looking for a damper you should consider Motosportz.

 

[mtne]

Hey Kelly, what makes this not work for the 610 as an underbar mount? Is it just the control arm? OR is it the spacing of the bars where it acts as a riser? Wondering if I wouldn't be able to make a piece to work off of the tank bolt..... I'm not skeer'd.....

 

[gandalf]

That's a great deal! Fortunately for me, I've had mine on my 08 TE 250 since last year and i can strongly recommend this damper! Thanks again Kelly!

 

[Joliet]

I really don't know. But this is the Motosportz forum, he is having a sale on his products, and it would probably be much better to discuss the relative merits of different brands somewhere else. Common topics, 4st, something like that.

Which is exactly the reason I PMed you (as soon as I realized my faux pas) to ask if you thought this should be deleted or not, but I guess a public ass chewin is just as good. Ken

 

[Motosportz]

Which is exactly the reason I PMed you (as soon as I realized my faux pas) to ask if you thought this should be deleted or not, but I guess a public ass chewin is just as good. Ken

No problems guys. No one is going to die over it.

 

[Coffee]

Which is exactly the reason I PMed you (as soon as I realized my faux pas) to ask if you thought this should be deleted or not, but I guess a public ass chewin is just as good. Ken

I am truly sorry. My intent was to use your post to inform others about the issue. I meant absolutely nothing towards you personally. I had assumed based on your PM that would be ok, I clearly misread the intent of your PM.

If I deleted your post, or suggest you to delete it, as a response to your PM then someone else would bring the same issue up - quite probably at a time when I would not have noticed it. So I used your post in what I thought was a helpful way to guide others.

Again, I am sorry I misinterpreted.