• Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

sm 610 flywheel magnet came loose

T

Tinus

Husqvarna
Hi

So 1 of my magnets on the flywheel came loose.
How can I fix this or where would I get parts for this.
The small pieces on the side broke off can I just stick it back
 
I saw that post on smj but it doesnt looks like the guy got his to start, so im a bit scared to buy that flywheel and then it doesnt work.
had a look this weekend the magnet is broken to bad and wont be able to replace it.
 
I replaced mine with the one from electrexworld. The magnets on it are internal so you never have to worry about them coming loose again. Changing over the backplate isn't too bad it's pretty much bolt off bolt on. Needed a new pick u coil on mine as well cuz the magnet had damaged it.
 
hi, I'm new here.
I have a sm 610s ( from 2000 ) and I have a similar problem. I changed the flywheel (with a RO610) and the stator+pickup coil ( a good one from an another bike ). But it doesn't start. It starts only with a bump start ( once I started, it works fine until I will shut it off ).
Do you have any advice ?

I apologize for any grammar mistakes. Thanks.
 
Hi,
The stator is in the correct position.
From what i read there is the possibility that the pickup coil to not be compatible with the flywheel. TRUE or FALSE?
 
I don't know although I have heard of the pick up coil casing cracking, mine was damaged when my magnet came off the flywheel and I had to replace it. Search the forum there should be a list of ohm values etc for the stator wires.
 
Hi,
Problem solved. I managed to acquire a flywheel with exposed magnets ( like the original one ). Now the bike starts, but with the new electrex flywheel it don't starts. Do you have any idea how to fix this electrex flywheel problem, because I don't know how long this old flywheel will work.

I apologize for any grammar mistakes. :)
 

Attachments

  • 2015-05-16_15-40-01_451.jpg
    2015-05-16_15-40-01_451.jpg
    187.9 KB · Views: 45
  • 2015-05-16_15-40-30_240.jpg
    2015-05-16_15-40-30_240.jpg
    173.4 KB · Views: 45
popastefan said:
Hi,
Problem solved. I managed to acquire a flywheel with exposed magnets ( like the original one ). Now the bike starts, but with the new electrex flywheel it don't starts. Do you have any idea how to fix this electrex flywheel problem, because I don't know how long this old flywheel will work.

I apologize for any grammar mistakes. :)
Click to expand...

I don't know. When I got the electric flywheel I fitted it with a new pick up coil and the old stator and it worked fine.
 
You must log in or register to reply here.
Back
Top