• 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

250-500cc Sealing the WR250 Airbox?

2whlrcr

2whlrcr

Husqvarna
A Class
Anybody figure out a sano way to seal the bottom of the WR 250 airbox? I did a couple of mud races this weekend and discovered my bike sucked some dirt.
 
Pretty simple..... Pull your mudflap and caulk the drain slot shut. Then cut a small round hole in the center of the bottom of the airbox. I installed a KTM bulb type drain or you can duct tape it and cut an "X" with razor knife in the tape for a drain. Tape up your airbox sides while your at it.
 
You must log in or register to reply here.
Back
Top