125-200cc power now\ power now plus

[hagaiwr]

hi guys
been reading for a while, thanks for the info some of it really helps
i have a power now monted on my wr125 09 and it really works.
anyone knows if the plus helps as well?
i could use some more bark down low....

and jetting in generel:
when the weather gets hot- lean or rich?


thanks

 

[sean]

Really, you can feel a difference, i was always under the understanding that they didnt do that much to warrant the money, i put my money in a G2 throttle body and cams, works really well on my 250

 

[robertaccio]

pn and pn plus on 4t (TXC450) the two made my machine a rock climbing tractor. For 2T I cant say.

 

[hagaiwr]

it works for me

Really, you can feel a difference, i was always under the understanding that they didnt do that much to warrant the money, i put my money in a G2 throttle body and cams, works really well on my 250

before i installed it there was nothing at the bottom now it's a bit better

 

[rockdancer]

does the power now fit both PWK and TMX 38mm??

 

[wallybean]

You can get them for both carbs but if you have a PWK 38 mm airstriker I can't imagine you needing the carb divider. I put one in my WR250 trying to make the TMX work better. It was a waste of money, it helped a little but didn't really solve the low end/early mid problems especially at altitude. Bolted on a PWK 38 airstriker and all issues went away, no need for the divider.

Walt

 

[Dirtdame]

Just a note: I ordered a Powernow over the phone from the manufacturer, and they sent me the wrong item. No problem so much there. Mistakes can happen. So I e-mailed them and explained what happened and that I would call them in the morning. They open at 7 AM Pacific time and close at 3:30 pm and are open for business Monday through Friday. SO Tuesday morning, I was mildly surprised not to see an answer to my e mail. I called them up around 9 and got a recorded message telling me that all the sales people were busy right now, so leave a number and they will get back to me. So I did. An hour later, nobody had gotten back to me, so I called again, got the same message, two hours later I called again, same sh**! Left them another e mail telling them that this was the most extreme form of poor customer service that I had ever heard of. The next morning, Wednesday, they had not called back or answered my e mail, so I had to call my credit card company and put the charge in dispute. It's been almost a week now and I have never gotten a response of any sort from the people at Scaryfast, other than to post my payment to them. Beware of these people.

 

[rockdancer]

thanks for that - looks like its PWK then

 

[Motosportz]

IMHO even with a PWK the divider plates can and do help. It is a mild upgrade but does work with carbs I have done this with.

 

[Phoenix]

Just a note: I ordered a Powernow over the phone from the manufacturer, and they sent me the wrong item. No problem so much there. Mistakes can happen. So I e-mailed them and explained what happened and that I would call them in the morning. They open at 7 AM Pacific time and close at 3:30 pm and are open for business Monday through Friday. SO Tuesday morning, I was mildly surprised not to see an answer to my e mail. I called them up around 9 and got a recorded message telling me that all the sales people were busy right now, so leave a number and they will get back to me. So I did. An hour later, nobody had gotten back to me, so I called again, got the same message, two hours later I called again, same sh**! Left them another e mail telling them that this was the most extreme form of poor customer service that I had ever heard of. The next morning, Wednesday, they had not called back or answered my e mail, so I had to call my credit card company and put the charge in dispute. It's been almost a week now and I have never gotten a response of any sort from the people at Scaryfast, other than to post my payment to them. Beware of these people.

I have learned that this is why you ALWAYS use a credit card to buy online and never your bank account. I know some people are anti-credit card, but I have had several disputes and they have always gone to bat for me (and won). Hopefully yours works out the same way.

I have also been curious about the PowerNow products, but haven't forked out the money to try them.

 

[TROFFER88]

Just had RB do some work on a pwk for one of my bikes , worth every $$$$ . I think this mod would be the cats a$$ on a WR 125. http://www.rb-designs.com/

 

[Motosportz]

Just had RB do some work on a pwk for one of my bikes , worth every $$$$ . I think this mod would be the cats a$$ on a WR 125. http://www.rb-designs.com/

We will know soon. After talking with you and buddy Ken who had his GG300 PWK carb done i contacted them and will be working on some stuff for the 125

 

[surfer1100]

We will know soon. After talking with you and buddy Ken who had his GG300 PWK carb done i contacted them and will be working on some stuff for the 125

I already know, Mister RB's work is fantastic,the divider plate gives you 36mm low end and regular top end possibly more if you do the 39mm bore. I've noticed the needle is a little more touchy, but the bike is so versatile.

 

[ray_ray]

I was just informed by scaryfast people that a PN kit is not available for a 08 TXC250 ...

Is there anyone else who might sell this product or a similar one?