• Husqvarna Motorcycles Made In Sweden - About 1988 and older

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

Parts lists - this should probably go into the tech section, but I can't post there...

80sDweeb

80sDweeb

Husqvarna
AA Class
I discovered that a PDF parts list for my '86 WR 400 Enduro was corrupted - only the first page would open (I had found it many years ago, and I've had some serious hard drive troubles since then, lost some very good stuff.) I started searching for it online, and didn't find much, until - I found a great site with a huge list of microfiches! Nice downloadable PDFs!

http://www.husqvarnaoutlet.com/parts_fiche

I don't know if everyone here already knows about this, but it wasn't mentioned in the "Vintage Tech Ref and Parts" section, so I thought I'd point it out. I got what I needed in VERY nice quality, much nicer than what I had before.

Scott in Penfield NY
 
You must log in or register to reply here.
Back
Top